CMP Triton ATEX cable gland Exd T3CDS 20mm

Call for Price

CMP explosionproof ATEX cable glands and accessories

Description

CMP Triton CDS (T3CDS) | Ex e, Ex d, Ex nR & Ex ta | Explosive Atmosphere Cable Gland For all types of Armoured Cables

 

• Reduces installation times, cost & risk
• Direct & remote installation
• Unique compensating displacement seal system (CDS)
– Metal-to-metal installation every time regardless of cable diameter
• Designed to prevent Coldflow, see CMP Technical Document TS002 (available upon request)
• Integral protected deluge seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• -60°C to +130°C (standard), -20°C to 200°C (ThermEx option T3CDSHT)
• Globally marked, IECEx, ATEX, UL & cCSAus
• EMC tested

† Grooved Cone (X) is predominantly used for Wire Braid (e.g. GSWB, TCWB), Steel Tape Armour (STA, DSTA) and Aluminium Strip Armour (ASA) but is also suitable for Single Wire Armour (SWA), Aluminium Wire Armour (AWA) and Pliable Wire Armour (PWA) if the range is outside that of the Stepped Cone (W).

Note: Grooved Cone (X) dimensions shown in the Cable Gland Selection Table below are for a double wire strand of braid armour cables. Tapes can also be doubled over. For cables that have only a single layer of armour such as SWA the clamping range should be used as shown in the table below.

Stepped (W) Cone is suitable for Single Wire Armour (SWA), or Aluminium Wire Armour (AWA) cables.

 

CMP T3CDS
CMP Triton

 

Metric Thread Length (Metric) “E” NPT Thread Length
(NPT) “E”
NPT Min Max Min Max Min Max Min Max Max Max Size Type Ordering
Suffix
16 M16 15.0 3.1 8.6 6.1 13.1 0.3 1.0 0.8 1.25 24.0 26.4 78.7 16 T3CDS 1RA PVC36 0.18
20S16 M20 15.0 ½” 19.9 ¾” 3.1 8.6 6.1 13.1 0.3 1.0 0.8 1.25 24.0 26.4 78.7 20S16 T3CDS 1RA PVC36 0.20
20S M20 15.0 ½” 19.9 ¾” 6.1 11.6 9.5 15.9 0.3 1.0 0.8 1.25 24.0 26.4 78.7 20S T3CDS 1RA PVC36 0.20
20 M20 15.0 ½” 19.9 ¾” 6.5 13.9 12.5 20.9 0.4 1.0 0.8 1.25 30.5 33.6 76.2 20 T3CDS 1RA PVC06 0.28
25S M25 15.0 ¾” 20.2 1″ 11.1 19.9 14.0 22.0 0.4 1.2 1.25 1.6 37.5 41.3 88.8 25S T3CDS 1RA PVC09 0.44
25 M25 15.0 ¾” 20.2 1″ 11.1 19.9 18.2 26.2 0.4 1.2 1.25 1.6 37.5 41.3 88.7 25 T3CDS 1RA PVC09 0.44
32 M32 15.0 1″ 25.0 1 ¼” 17.0 26.2 23.7 33.9 0.4 1.2 1.6 2.0 46.0 50.6 90.7 32 T3CDS 1RA PVC11 0.63
40 M40 15.0 1 ¼” 25.6 1 ½” 22.0 32.1 27.9 40.4 0.4 1.6 1.6 2.0 55.0 60.5 93.2 40 T3CDS 1RA PVC15 0.91
50S M50 15.0 1 ½” 26.1 2″ 29.5 38.1 35.2 46.7 0.4 1.6 2.0 2.5 60.0 66.0 100.7 50S T3CDS 1RA PVC18 1.12
50 M50 15.0 2″ 26.9 2 ½” 35.6 44.0 40.4 53.0 0.6 1.6 2.0 2.5 70.1 77.1 105.8 50 T3CDS 1RA PVC21 1.60
63S M63 15.0 2″ 26.9 2 ½” 40.1 49.9 45.6 59.4 0.6 1.6 2.0 2.5 75.0 82.5 102.5 63S T3CDS 1RA PVC23 1.73
63 M63 15.0 2 ½” 39.9 3″ 47.2 55.9 54.6 65.8 0.6 1.6 2.0 2.5 80.0 88.0 105.4 63 T3CDS 1RA PVC25 1.78
75S M75 15.0 2 ½” 39.9 3″ 52.8 61.9 59.0 72.0 0.6 1.6 2.0 2.5 90.0 99.0 110.6 75S T3CDS 1RA PVC28 2.57
75 M75 15.0 3″ 41.5 3 ½” 59.1 67.9 66.7 78.4 0.6 1.6 2.5 3.0 100.0 110.0 120.3 75 T3CDS 1RA PVC30 3.33
90 M90 24.0 3 ½” 42.8 4″ 66.6 78.6 76.2 90.3 0.8 1.6 3.15 4.0 115.0 126.5 138.9 90 T3CDS 1RA PVC32 4.87
100 M100 24.0 3 ½” 42.8 4″ 76.0 90.9 86.1 101.4 0.8 1.6 3.15 4.0 127.0 139.7 128.2 100 T3CDS 1RA LSF33 4.97
115 M115 24.0 4″ 44.0 5″ 86.0 97.9 101.5 110.2 0.8 1.6 3.15 4.0 138.0 151.8 161.3 115 T3CDS 1RA LSF34 7.72
130 M130 24.0 5″ 46.8 97.0 114.9 110.2 123.2 0.8 1.6 3.15 4.0 157.0 172.7 173.3 130 T3CDS 1RA LSF35 9.78